{"product_id":"1m-6pin-male-to-male-ams-extension-data-cable-with-ferrite-core","title":"1m 6Pin Male to Male AMS Extension Data Cable with Ferrite Core","description":"\u003cp\u003eThis \u003cstrong\u003e1m 6-pin AMS extension data cable\u003c\/strong\u003e is a longer replacement for the short data cable that links your \u003cstrong\u003eAMS to the printer\u003c\/strong\u003e, giving you a full metre of slack to put the unit where it actually suits your bench. A moulded ferrite core on the cable suppresses electrical interference so the data line stays clean over the longer run.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Extend the AMS Cable?\u003c\/h2\u003e\n\u003cp\u003eThe cable that ships with the AMS is only long enough to sit the unit directly on top of the printer or hard up against it. That works until it doesn't. Stacking the AMS on the lid blocks the one panel you need to open when a print goes wrong, and it puts several kilos of spools exactly where you want your hands. A metre of cable lets you move the AMS somewhere sensible and leave it there.\u003c\/p\u003e\n\n\u003ch2\u003eWhat It Lets You Do\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShelve the AMS above or beside the printer\u003c\/strong\u003e so the lid stays clear and finished prints are easy to reach\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpread multiple AMS units out\u003c\/strong\u003e across a bench or shelf instead of stacking them in a tower\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eKeep the AMS in a drybox or cabinet\u003c\/strong\u003e while the printer stays out in the open\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTidy the cable run\u003c\/strong\u003e by routing it behind or under the printer rather than looping it over the top\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhy the Ferrite Core Matters\u003c\/h2\u003e\n\u003cp\u003eThe AMS and the printer talk over a data line, and a longer cable picks up more electrical noise from everything sharing the bench: stepper motors, the heatbed, the power supply. The ferrite core moulded onto the cable absorbs that high-frequency interference before it reaches the connector. On a short factory cable it is barely needed. On an extended run it is the difference between a link that just works and intermittent AMS dropouts mid-print.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 1 metre\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e 6-pin, male to male\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInterference suppression:\u003c\/strong\u003e moulded ferrite core\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e data only, replaces the standard AMS to printer cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eSuits Bambu Lab AMS units that connect to the printer with a 6-pin data cable. Before ordering, check the cable currently running between your AMS and printer: it should have a flat 6-pin plug at each end. If yours looks different, message us and we will confirm before you buy.\u003c\/p\u003e\n\n\u003cp\u003eRunning more than one AMS? Pick up a spare so you can lay them out the way you want rather than the way the stock cable allows. Ships fast from our Sydney warehouse with Australia-wide delivery.\u003c\/p\u003e\n","brand":"Bambu","offers":[{"title":"Default Title","offer_id":48868909744382,"sku":null,"price":12.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/2338\/4318\/files\/Coming_Soon_-_Placeholder_Image.png?v=1779967316","url":"https:\/\/www.filamenthub.com.au\/products\/1m-6pin-male-to-male-ams-extension-data-cable-with-ferrite-core","provider":"FilamentHub","version":"1.0","type":"link"}