{"product_id":"activated-carbon-air-filter-for-x1-p1-series","title":"Activated Carbon Air Filter for X1\/P1 series","description":"\u003cp\u003eThis \u003cstrong\u003eactivated carbon air filter\u003c\/strong\u003e is a replacement for the exhaust filter in \u003cstrong\u003eBambu Lab X1 and P1 series printers\u003c\/strong\u003e, including the X1, X1C, X1E and P1S. It sits in the rear vent and scrubs the enclosure air before it is pushed out into your room, with the activated carbon adsorbing the VOCs and odours produced during printing.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Replace It?\u003c\/h2\u003e\n\u003cp\u003eThe filter that shipped with your printer does not last forever. Activated carbon works by trapping fume molecules in its pores, and once those pores are full it stops filtering, even though it looks exactly the same from the outside. Bambu Lab's own guidance is to replace it after around \u003cstrong\u003e1440 hours of cumulative print time\u003c\/strong\u003e, roughly 60 full days of printing. If your farm runs daily, that comes around faster than you would think, and the first sign is usually the ABS smell creeping back into the room.\u003c\/p\u003e\n\n\u003ch2\u003eWhen It Matters Most\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eABS, ASA, PC and Nylon printing.\u003c\/strong\u003e These high-temperature materials produce the bulk of the VOCs the filter exists to catch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrinters in living spaces.\u003c\/strong\u003e If your X1C or P1S sits in a study, garage workshop or spare room rather than a ventilated shed, a fresh filter makes a noticeable difference to odour\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnclosed long prints\u003c\/strong\u003e, where fumes have hours to build up inside the chamber\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBeing upfront: if you only ever print PLA, the filter has an easy life. PLA produces far fewer VOCs than ABS or ASA, so you can stretch the replacement interval. And this is a carbon filter for gases and smells, not a HEPA filter, so it targets odours and VOCs rather than ultrafine particles.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eThe swap is tool-free and takes under a minute:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSlide the plastic cover off the rear vent\u003c\/li\u003e\n  \u003cli\u003ePull the old filter out, wiggling gently if it is snug\u003c\/li\u003e\n  \u003cli\u003ePush the new filter fully in so the cover sits flush\u003c\/li\u003e\n  \u003cli\u003eClip the cover back on\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBambu Lab X1 series:\u003c\/strong\u003e X1, X1 Carbon, X1E\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBambu Lab P1 series:\u003c\/strong\u003e P1S (and P1P printers fitted with an enclosure kit)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePrinting lots of \u003ca href=\"\/collections\/abs-filament\"\u003eABS\u003c\/a\u003e or \u003ca href=\"\/collections\/asa-filament\"\u003eASA\u003c\/a\u003e? Those are the materials that load this filter fastest, so it is worth keeping a spare on the shelf. Ships fast from our Sydney warehouse with Australia-wide delivery.\u003c\/p\u003e\n","brand":"Bambu","offers":[{"title":"Default Title","offer_id":48592198402302,"sku":"CarbonFilter","price":8.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/2338\/4318\/files\/Activated-carbon-air-filter_41a42676-356d-44bb-af45-c9cc2df206a2.jpg?v=1784167128","url":"https:\/\/www.filamenthub.com.au\/products\/activated-carbon-air-filter-for-x1-p1-series","provider":"FilamentHub","version":"1.0","type":"link"}