{"product_id":"panda-edge-cnc-precision-scraper","title":"BIQU Panda Edge Magnetic Scraper - CNC Aluminium","description":"\u003cp\u003eThe \u003cstrong\u003eBIQU Panda Edge\u003c\/strong\u003e is a CNC-machined aluminium scraper with an \u003cstrong\u003eSK5 tool steel blade\u003c\/strong\u003e, built for lifting finished prints off the plate without gouging the surface or your knuckles. Two magnets set into the handle mean it lives on the printer rather than at the bottom of a drawer.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Not Just Use the Bundled Scraper?\u003c\/h2\u003e\n\u003cp\u003eThe thin scraper that ships with most printers flexes under load, and that flex is what turns a clean lift into a scratched plate. You push harder, the blade skips, the tip digs in. A rigid machined aluminium body puts your force straight into the edge instead of absorbing it, so the blade goes under the print rather than skating across it.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Makes It Work\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSK5 tool steel blade.\u003c\/strong\u003e High-carbon tool steel, ground thin at the tip so it slides under a first layer instead of bruising it\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMagnetic storage.\u003c\/strong\u003e Two magnets inset into the back of the handle hold it to the printer frame or any steel surface, so it is within reach at the moment you actually want it\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eScrew-retained blade.\u003c\/strong\u003e The blade is held by two screws rather than moulded in place, so a dulled or nicked edge does not mean a new tool. \u003ca href=\"\/products\/scraper-blade\"\u003eReplacement blades\u003c\/a\u003e are stocked separately\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMachined finger ledge and grip ribs\u003c\/strong\u003e for a controlled push, without your hand creeping forward onto the edge\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHanging hole\u003c\/strong\u003e at the tail if you would rather keep it on a hook or lanyard\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eGetting Prints Off Without Marking the Plate\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eLet the plate cool first. Most prints release on their own as the plate contracts, and a cold print lifts with almost no force\u003c\/li\u003e\n  \u003cli\u003eStart at a corner and keep the blade flat against the plate rather than tipped into it\u003c\/li\u003e\n  \u003cli\u003ePush, do not lever. Levering concentrates all the force on one point of the tip, and that is what marks PEI\u003c\/li\u003e\n  \u003cli\u003eTake the plate off the printer where you can, so you are not pushing against the bed and gantry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOn flexible spring steel sheets you often will not need a scraper at all, just flex the plate. Keep this for the stubborn ones: large flat bottoms, PETG that has bonded a little too enthusiastically, and anything printed on a smooth plate.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade:\u003c\/strong\u003e SK5 tool steel, screw-retained\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHandle:\u003c\/strong\u003e CNC-machined aluminium alloy\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall length:\u003c\/strong\u003e 161.87mm (6.37in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade width:\u003c\/strong\u003e 22.9mm (0.90in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 18.46mm (0.73in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead height:\u003c\/strong\u003e 32.5mm (1.28in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMagnets:\u003c\/strong\u003e two, inset into the handle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e BIQU\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePrinter-agnostic and surface-agnostic, it works with whatever you are running. Blades are a consumable, so it is worth adding a \u003ca href=\"\/products\/scraper-blade\"\u003espare scraper blade\u003c\/a\u003e to your order rather than waiting until the edge is blunt. Pair it with our \u003ca href=\"\/collections\/effect-patterned-build-plates\"\u003ebuild plates\u003c\/a\u003e, or browse the rest of our \u003ca href=\"\/collections\/3d-printing-accessories\"\u003e3D printing accessories\u003c\/a\u003e. Ships fast from our Sydney warehouse with Australia-wide delivery.\u003c\/p\u003e\n","brand":"Biqu","offers":[{"title":"Default Title","offer_id":48885835792638,"sku":null,"price":24.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/2338\/4318\/files\/1_55523bae-5119-4c86-890b-5878255d101a.png?v=1788649741","url":"https:\/\/www.filamenthub.com.au\/products\/panda-edge-cnc-precision-scraper","provider":"FilamentHub","version":"1.0","type":"link"}