| PLA PRO (+) | Low-viscosity, easy-support removal | 190–220 °C | 1.75 mm | ≥ 30 MPa tensile |
| PLA 55 (HS) | High-toughness, flame-retardant PLA | 270–290 °C | 1.75 mm | Deformation temp 87 °C |
| PLA wooden | 10–15 % bamboo powder, wood texture & scent | 180–200 °C | 1.75 mm | Bending ~ 230 kg/cm² |
| PLA Silky | Bright finish, low-viscosity | 190–220 °C | 1.75 mm | ≥ 28 MPa tensile |
| PLA marble | Marbled color effect | 190–220 °C | 1.75 mm | Uniform molecular weight |
| PLA flexible Plus | Very soft (softer than TPU at 0.8 mm shell) | 190–220 °C | 1.75 mm | Elongation 580–600 % |
| PLA matte | Low-shine, matte surface | 220–240 °C | 1.75 mm | Stable diameter |
| PLA fast rainbow | Color shifts every 1–3 m | 190–220 °C | 1.75 mm | Fast gradient change |
| PLA silk fire rainbow | Yellow→red “fire” gradient | 190–220 °C | 1.75 mm | Flame-like transition |
| PLA ice blue rainbow | Light→dark blue gradient | 190–220 °C | 1.75 mm | Cool gradient |
| PLA luminous | White by day, glows after UV charge | 190–220 °C | 1.75 mm | Glow duration ~ minutes |
| PLA galaxy | Glitters + phosphor glow | 190–220 °C | 1.75 mm | Starry effect |
| PETG | High transparency & toughness | 220–240 °C | 1.75 mm | Flexural 80 MPa |
| PETG hyper | High-flow PETG for speed | 210–230 °C | 1.75 mm | Enhanced MFI |
| CRCF-PETG | Coated carbon fiber, 15–20 % | 250–280 °C | 1.75 mm | Impact ≥ 65 MPa |
| ABS PRO | Low-warp, glossy | 230–250 °C | 1.75 mm | Tg 106.7 °C |
| ABS hyper | High-flow ABS | 230–250 °C | 1.75 mm | MFI 8–12 g/10 min |
| CRCF-ABS | Coated carbon fiber, 15–25 % | 240–280 °C | 1.75 mm | Fiber 0.1–3 mm |
| PC PRO | Amorphous, electrical insulation | 280–300 °C | 1.75 mm | Printed 92.7 MPa |
| CRCF-PC | Coated carbon fiber, 15–20 % | 260–280 °C | 1.75 mm | HDT 80–92 °C |
| TPU (64D) | Shore 64D, good elongation | 220–240 °C | 1.75 mm | Elongation 350 % |
| TPU (85A) | Shore 85A, flexible | 230–240 °C | 1.75 mm | Tensile 37 MPa |
| TPU (95A) | Shore 95A, wear & aging resistant | 230–240 °C | 1.75 mm | Tensile 45 MPa |
| STTPU | PLA-hard filament, prints soft at 60A | 200–240 °C | 1.75 mm | Model 75A |
| AMS STTPU | Colorful PLA-hard → 75–85A soft | 200–240 °C | 1.75 mm | > 600 cycles |
| Water-soluble | Dissolves in warm water | 200–230 °C | 1.75 mm | Bond strength 1.08 GPa |
| PVB polishing | Polish smooth with alcohol | 185–210 °C | 1.75 mm | Vicat 55 °C |
| Nano Silver | Antimicrobial 90 % kill rate | 190–220 °C | 1.75 mm | Skin-safe |
| Nylon GF | PA6 + 20 % glass fiber | 240–270 °C | 1.75 mm | Tensile ≥ 8000 MPa |
| PA CF | PA + 15 % carbon fiber | 260–280 °C | 1.75 mm | HDT ≥ 180 °C |
