BIQU Panda Juicer Hotend Nozzle 0.4mm – H2 Series / P2S / X2D / A1
BIQU Panda Juicer Hotend Nozzle 0.4mm – H2 Series / P2S / X2D / A1
Couldn't load pickup availability
The BIQU Panda Juicer Hotend replaces your stock Bambu Lab hotend with a one-piece nozzle and heatbreak machined from a single block of metal — which means the gap where leaks, clogs, and heat creep usually start simply doesn't exist.
Built around a hardened steel 0.4mm nozzle, it handles abrasive filaments like carbon fibre and glass fibre without wearing out the way brass does, and the high-flow versions keep extrusion consistent when you push print speeds up. The magnetic drop-in design swaps in about 30 seconds with no tools, so switching nozzles between jobs stops being the chore that makes you put it off. The sandblasted, hard-anodised body sheds dust and resists corrosion while dissipating heat where you want it.
Choose Your Variant
- SF – Standard Flow: Reliable everyday performance for standard print profiles
- HF – High Flow: Increased melt capacity for faster speeds and thicker layers
- HFC – High Flow + Nano Coating: Maximum flow plus a nano-coated nozzle rated to 9.8 Mohs hardness — 2x+ longer life, zero PLA wear, and minimal residue buildup with abrasive materials
Best Uses
- Printing abrasive filaments — carbon fibre, glass fibre, and other filled composites
- High-speed printing where the stock hotend starts to under-extrude
- Production and continuous printing where clogs and leaks cost real time
- Anyone who swaps nozzles often and wants it done in seconds, not minutes
Why a One-Piece Design Matters
Most hotend failures trace back to the same spot: the joint between nozzle and heatbreak. Molten plastic works its way into that gap, hardens, and you end up with leaks, partial clogs, or a blob of burnt filament fused to the heater block. Machining both parts from a single piece of metal removes the joint entirely — there's nowhere for plastic to go except out the nozzle.
Compatibility
- Bambu Lab H2 Series (H2S / H2D / H2C)
- Bambu Lab P2S
- Bambu Lab X2D
- Bambu Lab A1 / A1 mini
Specs
- Nozzle diameter: 0.4mm
- Nozzle material: Hardened steel (nano-coated on HFC variant, 9.8 Mohs)
- Construction: Integrated one-piece nozzle + heatbreak, sandblasted hard-anodised finish
- Installation: Magnetic quick-swap, tool-free, ~30 seconds
- Filament support: PLA, PETG, ABS, TPU, carbon fibre, glass fibre and other abrasive composites
- Compatible printers: Bambu Lab H2 Series, P2S, X2D, A1, A1 mini
